-edible zone-
*
-- Luca's comments:
"I have a thorens td-160 super that
I recently finished restoring.
......... Here is a little
description of the table itself and the work I put in to it. It is a
160super with cherry wood finished plinth. I installed a Jelco 750d
armboard purchased from Soundsupports , the armboard of course houses
the Jelco 750d fluid damped tonearm. The platter was polished and shined
with steel wool and metal polish. A brand new thorens belt was installed
as the old one was no longer any good. Also, all controls were lubed and
cleaned as well as the motor , I've added sewing machine oil, it now
runs like new! The platter mat was replaced by one that is made of cork
material. The cartridge used is a audio technica at130e new old stock.
The suspension was fully adjusted by me , the table gives a good bounce.
Finally, I drilled a hole of over an inch diameter on the bottom plate
to accommodate the clearance of the Jelco tonearm cable, the plate was
also spray painted with a glossy piano black paint giving it a gloss
finish. To finish it off, I installed 4 golden brass spikes to use as
isolation feet."
System details:
Musical Fidelity a300
integrated amplifier
Rotel RCD-1070 cd player
Audio Technica
AT-130e NOS Cartridge ( I have a few Audio Technica NOS Carts AT155LC ,
AT125LC AT20SLA )
B&W DM601 S3 Speakers
Graham Slee AMP 2 SE Phono
Stage
Van Den Hul Wiring